Author Topic: Lesson one (Always use a heatsink) (Read 4920 times)

JollyRoger · « **on:** November 29, 2005, 01:38:24 AM »

Life changing video.

http://video.google.com/videoplay?docid=5393904704265757054&q=Overclock

Papa_Smurf · « **Reply #1 on:** November 29, 2005, 07:27:02 AM »

It's gone. Whatever it was is lost forever.

JollyRoger · « **Reply #2 on:** November 29, 2005, 09:12:38 AM »

Mr_Anderson · « **Reply #3 on:** November 29, 2005, 09:39:35 AM »

What did you do Jolly??

JollyRoger · « **Reply #4 on:** November 29, 2005, 12:18:14 PM »

it's not me. it's google. but i'll get it back

snauzberries · « **Reply #5 on:** November 29, 2005, 12:19:38 PM »

That is awsome...in a sick computer destroting way

Mr_Anderson · « **Reply #6 on:** November 29, 2005, 01:10:13 PM »

...

JollyRoger · « **Reply #7 on:** November 29, 2005, 02:12:16 PM »

Try this out....(French guy drops the S-bomb) sorry bout this but the vid is a need to see

http://video.google.com/videoplay?docid=5393904704265757054&q=exploding+cpu

JollyRoger · « **Reply #8 on:** November 29, 2005, 02:15:19 PM »

they also do this to a couple of P4, but this vids were full of swearing.
But this should convince you to always use a heatsink.

ZWarrior · « **Reply #9 on:** November 30, 2005, 12:48:14 AM »

Wow! That was awesome to see happen.

JollyRoger · « **Reply #10 on:** November 30, 2005, 12:49:15 PM »

You see the core voltage 4.23 volts.

The only thing holding that poor little processor down was the heat sink.

Mr_Anderson · « **Reply #11 on:** November 30, 2005, 01:55:36 PM »

Is that what it was sitting at??

From what i could tell, I thought it was just abouve 4.1 Ghz.

ZWarrior · « **Reply #12 on:** December 01, 2005, 12:03:34 PM »

You are talking about two different things. They had the Core Voltage cranked and that meant that the CPU speed was cranked as well, but you can do it without ranking voltage as much if the board will support it.

The point here was to get that sucker HOT, so they needed to push more voltage to push the heat up.

Mr_Anderson · « **Reply #13 on:** December 01, 2005, 12:25:01 PM »

I read it wrong. From what I saw, the wording looked like Ghz. It was a little blurry and hard to read.

JollyRoger · « **Reply #14 on:** December 01, 2005, 03:31:55 PM »

the Clock speed was in Mhz (3784.5)
The Core Voltage was at the top and the Clock was near the bottom

Mr_Anderson · « **Reply #15 on:** December 01, 2005, 03:44:33 PM »

I guess I was reading it wrong...

News:

Recent Posts

Fiction

Permissions

Author Topic: Lesson one (Always use a heatsink) (Read 4920 times)