Author Topic: If a Flash goes bad... (Read 6513 times)

JollyRoger · « **on:** February 13, 2004, 01:13:47 AM »

It's Jolly asking for some answers.
I have a Gigabute GA-6BXE motherboard
on my brother/mother's computer.
I flashed the BIOS to upgrade support
of a larger hard drive and well now it won't boot. Is it recoverable?

ZWarrior · « **Reply #1 on:** February 13, 2004, 09:37:11 AM »

Well...
probably not after the fact. But it would be possible under certain circumstances.

maybe Boom can fill in the details better. If it's under warranty, you might be able to get them to cover it.

JollyRoger · « **Reply #2 on:** February 13, 2004, 09:41:24 AM »

It's a Four year old computer
0 Warranty

ZWarrior · « **Reply #3 on:** February 13, 2004, 12:18:48 PM »

DOH!

opiesilver · « **Reply #4 on:** February 13, 2004, 12:31:57 PM »

First off your need a boot disk that has drdos or something of similar nature. You need to put the flash utility on there and reflash the bios.

ZWarrior · « **Reply #5 on:** February 13, 2004, 01:42:37 PM »

Except, oh mighty Opie, the bootstrap is part of the BIOS.

So now what do you do?

opiesilver · « **Reply #6 on:** February 13, 2004, 03:54:23 PM »

And if the self recovery doesn't work, what do you do? You force a write of a new bios first before you call it bad.

Boomslang · « **Reply #7 on:** February 13, 2004, 06:23:47 PM »

http://tw.giga-byte.com/MotherBoard/Support/BIOS/HowToReflash/HowToReflash_1.htm

Or just ask them
http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

[Edited on 2-14-2004 by Boomslang]

JollyRoger · « **Reply #8 on:** February 14, 2004, 01:31:22 PM »

thats sweet but the computer isn't booting, period.

opiesilver · « **Reply #9 on:** February 14, 2004, 04:29:53 PM »

Did you do what has been recommended? What do you see happening on the screen?

JollyRoger · « **Reply #10 on:** February 14, 2004, 08:46:31 PM »

I have not been able to do anything since I flashed the BIOS. When I restarted the computer the screen stays black and nothing else happens. the power supply runs all the drives turn on but the computer just sits and has a black screen.
I followed the instructions that Gigabyte's page had posted. I am not even sure what went wrong It just won't boot.

Boomslang · « **Reply #11 on:** February 14, 2004, 09:39:21 PM »

upgrade time

opiesilver · « **Reply #12 on:** February 15, 2004, 12:17:39 AM »

Yep, that board is TOAST!!:hotbouns: Since you had a 440BX based board it's really time to upgrade.

Anyone got an old P2 board laying around?

JollyRoger · « **Reply #13 on:** February 15, 2004, 02:23:50 AM »

well It was time along time ago by my book but this is my moms computer.
If anybody has an old Board and chip laying around they could let go of fairly cheap I'd be intreasted.

snauzberries · « **Reply #14 on:** February 15, 2004, 02:57:03 PM »

and i liked that motherbord
we had many good night together
*sniff*:cry:

HOW COULD YOU JOLLY I TRUSTED YOU!

amazing how a simple bios question can turn into a soap oprea

[Edited on 15/2004/2 by [303]snauzberries]

ZWarrior · « **Reply #15 on:** February 16, 2004, 11:53:28 AM »

I will check my stash tonight. Perhaps I have an old board in there. I have a few P2-450's and now I am only using one of them, so the odds are good that the motherboard and processor are still in the stash.

JollyRoger · « **Reply #16 on:** February 19, 2004, 01:18:53 AM »

Problem Fixed
Snauz and Mom's computer now sports:
KM-400-M Motherboard
AMD duron 1.6Ghz
256 DDR

Boomslang · « **Reply #17 on:** February 19, 2004, 07:10:43 AM »

I think that one need a bios upgrade.

JollyRoger · « **Reply #18 on:** February 19, 2004, 10:46:48 AM »

:cry::cry::cry::cry::cry::cry::cry:

Fraggster · « **Reply #19 on:** February 19, 2004, 05:49:53 PM »

i dont know why im bothering to say this but on alot of boards you put the bios on a disk and the hold insert or something like that when you turn it on and it forces it to read the bios.

ZWarrior · « **Reply #20 on:** February 19, 2004, 08:28:57 PM »

Actually, most boards at this time are still dependent on the BIOS to boot that floppy. The technology is fairly new to allow you to boot from floppy to flash the BIOS.

I wish it had been around much longer, many of the peeps on this board could have used it over the past few years.

JollyRoger · « **Reply #21 on:** February 19, 2004, 08:51:37 PM »

or days!:D

Fraggster · « **Reply #22 on:** February 23, 2004, 09:18:10 PM »

Quote

Originally posted by [303]JollyRoger
Problem Fixed
Snauz and Mom's computer now sports:
KM-400-M Motherboard
AMD duron 1.6Ghz
256 DDR

that 1.6 will happily do 2.2-2.3 on air if it has the right stepping, and if you get adventrous it can be modded into an athlon

JollyRoger · « **Reply #23 on:** February 23, 2004, 09:58:10 PM »

It's running 1.8 right now
thats through bios
I dunno if I want to go much higher right now
I need it to stay stable
can't afford any more chips for it

News:

Recent Posts

Fiction

Permissions

Author Topic: If a Flash goes bad... (Read 6513 times)