Wireless AP Build Up.

[JollyRoger]

I am Starting to Build my wireless AP
It going to look a little like this:
Specs:
55W PSU and DC-DC Converter Kit
mini ITX EPIA 5000 Fanless Motherboard
VIA C3 533Mhz
128Mb RAM
128Mb CF memory HD CF/IDE
Morex 1 Slot Riser Card
3COM Wireless Adpapter 802.11a/b/g
OS -- Pebble Linux (weighing in @ 47Mb)

To be used to extend my network .87 Mile to my buddy Papa Smurf w/ a small 24db gain Parabollic Dish.

Once the parts show up I should get it done in about 2 weeks

Where I am get most of my gear
http://www.mini-itx.com/
PebbleLinux
http://www.nycwireless/pebble/




[Edited on 4-10-2004 by [303]JollyRoger]

[Fraggster]

Originally posted by [303]JollyRoger
I am Starting to Build my wireless AP
It going to look a little like this:
Specs:
55W PSU and DC-DC Converter Kit
mini ITX EPIA 5000 Fanless Motherboard
VIA C3 533Mhz
128Mb RAM
128Mb CF memory HD CF/IDE
Morex 1 Slot Riser Card
3COM Wireless Adpapter 802.11a/b/g
OS -- Pebble Linux (weighing in @ 47Mb)

To be used to extend my network .87 Mile to my buddy Papa Smurf w/ a small 24db gain Parabollic Dish.

Once the parts show up I should get it done in about 2 weeks

Where I am get most of my gear
http://www.mini-itx.com/
PebbleLinux
http://www.nycwireless/pebble/




[Edited on 4-10-2004 by [303]JollyRoger]

pics or bs pal:D j/k it wil be interesting to see how this works

[JollyRoger]

I will have a full write up with pics.
I have found my antenna I old satallite t.v. dish it gets between 23.45dB and 23.79 dB of gain so that'll be suffiitiant enough. i just need to make the Bi-quad and attach some 50 ohm coax to it. then get to work on the AP

[ZWarrior]

Make sure that Papa gets a Cantenna!

[JollyRoger]

"Can" We say Pringle's

[ZWarrior]

For less that $20 you can't beat the price, but you can get the signal to him.

[JollyRoger]

we shall see!

*Dive deep into the laboritory*