Check the hardware and software Hot Deals areas for savings on gear and software.
0 Members and 1 Guest are viewing this topic.
/seta com_maxfps 0 (0 is unlimited but causes weird effects sometimes with some cards.) Watch your averages and set to just below average to even things out./seta cg_drawfps 1 (everyone should know this, choices are 0, 1, 2, 3)/seta cl_connectionattempts 30 (this and following command fixed most connection issues for me)/seta cl_connectiontimeout 1000/seta pb_sleep 500 (supposed to fix stuttering in airstrikes and such, but I never had that issue, so experiment.)/seta rate 20000 (seemed to help smooth close in firefights a little default 25000)/seta com_hunkmegs 512 (I set this to half AVAILABLE system memory, less in vista as it's a hog for resources even when sleeping. I have 2 gig, so I use 512)/cl_maxpackets 100 = help getting a better ping, i get at least -10 ping in everyserver with this commands./r_polygonsetScale /r_polygonSetbias = i've seen a little difference in fps playing with these commands, i put them two at 0 value.For those who was wondering how to show fps:/cg_drawfps 1For getting a better field of view :/cg_fov 80 = default is 65 so i guess 80 is way better but have not tested if decrease fps.*EDIT: i've tested and it did'nt decrease much fps, maybe someone with lower fps can tell us, after testing a few more round, game play is way more competitive but feeling is a little bit different.Also:/r_rendererinuse 0and/r_rendererpreference 0 = Shader 2.0 helps a lot getting more fps but myself i cant set it lower than Shader 3.0, i guess the probleme is in my graphics cards drivers but for those who have older graphics cards, try it.the most important one : /cg_drawlagometershows the connection quality